Guild Wars Forums - GW Guru
 
 

Go Back   Guild Wars Forums - GW Guru > Forest of True Sight > Technician's Corner > Hardware

Notices

Reply
 
Thread Tools Display Modes
Old Sep 02, 2008, 06:50 AM // 06:50   #501
Krytan Explorer
 
Admael's Avatar
 
Join Date: Sep 2005
Location: California
Guild: Xen of Heroes
Advertisement

Disable Ads
Default



8800 GTS 512 (SLI'ed) ghetto rigged @ 864/2106/1107
Admael is offline   Reply With Quote
Old Sep 26, 2008, 08:27 PM // 20:27   #502
Frost Gate Guardian
 
Hannes's Avatar
 
Join Date: Oct 2007
Location: http://www.blowupdoll.co.za/
Guild: Band of Buds [BUD] (Officer)
Profession: N/
Default

Finally decided that the stock cooler was not good enough... 13 months later... lol

Asus Silent Square EVO


Ya I know it's not the best cooler out there, but it's got shiny bl00 LED's and I'm not a heavy OC'er
Hannes is offline   Reply With Quote
Old Sep 30, 2008, 04:38 AM // 04:38   #503
Desert Nomad
 
Seef II's Avatar
 
Join Date: Nov 2005
Location: US
Profession: R/Mo
Default

No pics, but I upgraded over the summer to:

Intel Core 2 Duo E8400 (Cooled with some $15 coolermaster thing, nice and quiet, much better than stock cooler)
4 GB of DDR2-800 by Patriot
Visiontek Radeon HD4850
Gigabyte EP35-DS3L mobo
A 22" widescreen monitor
Diamond 7-channel soundcard
Samsung SATA DVD-R
WD 500 GB SATA hard disk.


All in an antec sonata III (using the stock Earthwatts 500W PSU)
Seef II is offline   Reply With Quote
Old Oct 15, 2008, 12:02 AM // 00:02   #504
Lion's Arch Merchant
 
hellknight17's Avatar
 
Join Date: Oct 2005
Location: AZ
Profession: W/
Default

Here's my comp and setup.













System Spec:
Case: Antec Twelve Hundred
Processor: Intel Core 2 Quad Q6600 @3.4 from 2.4
Mother Board: MSI P7N Platinum NVIDIA nForce 750i SLI
Memory:CORSAIR DOMINATOR 4GB (2 x 2GB) DDR2 1066
Hard Drive: Seagate Barracuda 320GB 7200 RPM 16MB Cache
Video Cards: EVGA GeForce 8800GT Superclocked 512MB GDDR3 in SLI
CPU Cooler: ZALMAN 9500A 92mm
PSU: Antec TruePower Quattro 1000W
Sound Card: Creative Sound Blaster X-Fi XtremeGamer Fatal1ty

Some day I will add water cooling, better HD, and graphics cards.
hellknight17 is offline   Reply With Quote
Old Oct 24, 2008, 04:44 AM // 04:44   #505
Frost Gate Guardian
 
Join Date: Jun 2006
Location: Australia
Guild: Know Your Enemy [PMS]
Profession: Mo/
Default

No pics, but here is my system.

CPU: Intel Core 2 Quad Q9400 @ 3.8ghz
CPU Cooler: Thermalright TRUE Black 120 w/ 2x Scythe S-FLEX 120mm Fan 1600rpm (Push Pull ftw)
Motherboard: ASUS Rampage Extreme
RAM: Corsair 4GB DDR3 1600 w/ Dominator Cooler
GFX: Radeon 4870X2
HDD: 5x Western Digital 640GB SATA2 (Video Editing and 3D Modeling...)
PSU: Antec TruePower Quattro 1000W
Case: Antec 1200
Mouse: Deathadder
Keyboard: Merc Stealth
LCD: AOC 22" (Don't remember its model)

System is designed for huge work loads, lots of Maya and Avast (and obviously gaming). Next upgrade will probably be to a 24" LCD monitor with a true 8-bit panel and then another 4GB of ram.
Crowell The Fallen is offline   Reply With Quote
Old Oct 24, 2008, 06:10 PM // 18:10   #506
Furnace Stoker
 
bhavv's Avatar
 
Join Date: Sep 2006
Default Copper Pipes + Blue Lights!

Quote:
Originally Posted by I Dont Do Coke View Post
[*]Manufacturer: Me
^^ I liked that so much i'll quote it instead of just typing it. 'Me' is the best PC manufacturer in the entire universe =D (Me as in every single person that self builds).

Intel E8400 @ 4.0 Ghz + Asus Silent Knight II
2x2 Gb Crucial PC3-10600 @ 1500 Mhz + Thermalright V1R
MSI X48c Platinum
2x 1 Gb Powercolor PCS+ HD 4850
2x 500 Gb Samsung Spinpoint T166 (One buggered up and is being RMA'd)
Creative X-Fi Elite Pro + THX Gigaworks 7.1 Speakers
Aerocool Aeroengine II
Acer G24
OCZ ModXStream 780 watt PSU
+ Lots of blue lights:













And it needs plenty of feeding with plenty of food:



The case is really old and been through lots of upgrades, hence all the stickers and scratches. I want an Antec 900, but my current case is still fine. I have a Saitek Cyborg keyboard and Razer Deathadder Guild Wars edition on order and will post a picture of my desk after I get them on monday.

Last edited by bhavv; Oct 24, 2008 at 10:13 PM // 22:13..
bhavv is offline   Reply With Quote
Old Oct 24, 2008, 09:25 PM // 21:25   #507
Frost Gate Guardian
 
Hannes's Avatar
 
Join Date: Oct 2007
Location: http://www.blowupdoll.co.za/
Guild: Band of Buds [BUD] (Officer)
Profession: N/
Default

**LATEST UPGRADE**


MoBo: ASUS RAMPAGE FORMULA X48 (SLI)

RAM: Transcend aXeRam 2 x 2GB DDR2-1066Mhz Gaming Memory

Misc cooling: OCZ XTC Memory Airflow Cooler





(that soundcard cable is irritating me... just a little bit too short... oh well, it's gotta go OVER the memory cooler now lol)





Next on the list is a full tower... gogo Thermaltake Armor LCS !!
and maybe another 4Gb ram... ^_^

Last edited by Hannes; Dec 04, 2008 at 09:07 PM // 21:07..
Hannes is offline   Reply With Quote
Old Oct 24, 2008, 10:26 PM // 22:26   #508
Furnace Stoker
 
bhavv's Avatar
 
Join Date: Sep 2006
Default

Quote:
Originally Posted by Hannes View Post
and maybe another 4Gb ram... ^_^
Dont forget that triple channel is out soon. I bought some individual JEDEC standard modules and slapped on some heatsinks. If I then upgrade to X58 (Probably will next year), I just need to buy one more module instead of another two. 4 Gb is more then enough for now, then 6 Gb will be plenty for a long time to come.

I got these crucial sticks, then stuck on these heatspreaders, the main problem being that it invalidates the warranty as I had to remove the stickers to make it work, but hey, they hit 1700 Mhz in my current mobo, they would easilly reach at least 1800 Mhz on an ASUS Rampage or Gigabyte board with their 16 and 12 phases (MSI only use a 6 phase power system, while being very efficient it is crap at overclocking ram ). Then I'll just buy one more next year with an X58 and Nehalem CPU. Ebay makes upgrading yearly affordable.

P.S, I think that you need to stick a cathode under your graphics cards to light them up =D

Last edited by bhavv; Oct 24, 2008 at 10:35 PM // 22:35..
bhavv is offline   Reply With Quote
Old Oct 25, 2008, 03:00 AM // 03:00   #509
Lion's Arch Merchant
 
Evil Genius's Avatar
 
Join Date: Dec 2006
Location: Australia
Profession: Mo/
Default

Quote:
Originally Posted by bhavv View Post
Acer G24
A nice system you have there. How are you finding that monitor? Its 6 bit, but the contrast ratio and viewing angles are at 8-bit level according to the specs...Just interested in how it actually performs.

Quote:
Originally Posted by Hannes
MoBo: ASUS RAMPAGE FORMULA X48 (SLI)
You know no X48 motherboards support SLI? No LGA775 Intel chipset motherboard supports SLI ... only X58 (LGA1366) supports SLI.

Still a great board, thinking about nabbing one myself. Torn between it, the Foxconn Blackops, GB X48-DQ6 and DFI Lanparty UT-X48T2R.

Quote:
on an ASUS Rampage or Gigabyte board with their 16 and 12 phases
The ASUS Rampage Formula (DDR2) has 8phase PWM for the CPU and 2 phase PWM for the RAM.
The ASUS Rampage Extreme (DDR3) has 11phase PWM for the CPU and 2 phase PWM for the RAM.

The Gigabyte X48-DQ6 and X48T-DQ6 actually only have 6 phases for the CPU. Don't believe their "12 virtual phases" marketing bullshit.

Quote:
Originally Posted by X-bit labs
It is pretty funny that Gigabyte’s marking people are still trying to present the voltage regulator as a 12-phase one referring to twice as many inductance coils. But, don’t buy into it.
Evil Genius is offline   Reply With Quote
Old Oct 25, 2008, 05:26 AM // 05:26   #510
The Fallen One
 
Lord Sojar's Avatar
 
Join Date: Dec 2005
Location: Oblivion
Guild: Irrelevant
Profession: Mo/Me
Default

Quote:
Originally Posted by bhavv View Post
Dont forget that triple channel is out soon. I bought some individual JEDEC standard modules and slapped on some heatsinks. If I then upgrade to X58 (Probably will next year), I just need to buy one more module instead of another two. 4 Gb is more then enough for now, then 6 Gb will be plenty for a long time to come.

I got these crucial sticks, then stuck on these heatspreaders, the main problem being that it invalidates the warranty as I had to remove the stickers to make it work, but hey, they hit 1700 Mhz in my current mobo, they would easilly reach at least 1800 Mhz on an ASUS Rampage or Gigabyte board with their 16 and 12 phases (MSI only use a 6 phase power system, while being very efficient it is crap at overclocking ram ). Then I'll just buy one more next year with an X58 and Nehalem CPU. Ebay makes upgrading yearly affordable.
Ah yes Crucial. Micron set fabs are so yummy for OCing. Although, I hate to admit this. Crucial's latest DDR2 offers have been horrid and they should be ashamed of them. However, their DDR3 offers are amazing, as are GSkill's. GSkill is my top company right now though, as they seem to be moving into a purest movement with Micron fabs, and they implementing those fabs beautifully. <3

So the new eVGA x58 board is just plain sexy... Their digital power managment of vDROOP systems are AWESOME. The board to get if you ask me. Of course, that is if you ignore the fact that AMD's new Deneb CPU is a beast, and can hit 1.7v (I know, scary right?) 4.3GHz on air confirmed (Scythe cooler)

PS: bhavv, careful bud.... putting an AMD sticker with a Core2Duo inside may cause your PC to become possessed by demons and spontaneously combust. At one point, as a joke, I put an Apple sticker as a joke on one of my older systems... about 3 days after that, I went to start it up, and nada. Went to find out that overvoltage protection on my 5v rail had failed... poof went hardware... That hurt.
__________________
Lord Sojar is offline   Reply With Quote
Old Oct 25, 2008, 12:18 PM // 12:18   #511
Frost Gate Guardian
 
Hannes's Avatar
 
Join Date: Oct 2007
Location: http://www.blowupdoll.co.za/
Guild: Band of Buds [BUD] (Officer)
Profession: N/
Default

Quote:
Originally Posted by Evil Genius
You know no X48 motherboards support SLI? No LGA775 Intel chipset motherboard supports SLI ... only X58 (LGA1366) supports SLI.

Still a great board, thinking about nabbing one myself. Torn between it, the Foxconn Blackops, GB X48-DQ6 and DFI Lanparty UT-X48T2R.
Hey buddy

Yeap, I'm aware that the board can't Sli, I didn't buy it for that reason .

One of my buds organised me a sweet deal on that Asus board & the RAM, which is why I took it.

I wasn't planning on "upgrading" now, but my old mobo (XFX 650i Ultra) decided to die on me last week .
Northbridge overheated causing damage to the 'board, now the mobo doesn't pick up the gfx and also
one of the old ram chips (1Gb ddr2 800) got a bit wasted in the process...
Personally I think it's the nub who installed the cpu cooler that damaged the nb heatsink...

I live in South Africa and to send the board away for repairs costs more than a new one >_<
AND the warrantee had JUST expired, the mobo was 13 months old :|

Initial plan was to wait for Nehalem of course... But I'm addicted to teh interwebz and my games LOL!

Ah well... Guess it's not so bad... Maybe I'll wait for Westmere or Sandy Bridge now until next major upgrade?? \_(o.O)_/


Quote:
Originally Posted by bhavv
P.S, I think that you need to stick a cathode under your graphics cards to light them up =D
I think you're right... watch this space, moar bl00 glowies to follow soon!
Or... should I just wait until early next year when I plan on buying another case, then pimp everything out? lol

Last edited by Hannes; Oct 25, 2008 at 12:22 PM // 12:22..
Hannes is offline   Reply With Quote
Old Oct 28, 2008, 06:59 PM // 18:59   #512
Furnace Stoker
 
bhavv's Avatar
 
Join Date: Sep 2006
Default

Quote:
Originally Posted by Evil Genius View Post
A nice system you have there. How are you finding that monitor? Its 6 bit, but the contrast ratio and viewing angles are at 8-bit level according to the specs...Just interested in how it actually performs.

The ASUS Rampage Formula (DDR2) has 8phase PWM for the CPU and 2 phase PWM for the RAM.
The ASUS Rampage Extreme (DDR3) has 11phase PWM for the CPU and 2 phase PWM for the RAM.

The Gigabyte X48-DQ6 and X48T-DQ6 actually only have 6 phases for the CPU. Don't believe their "12 virtual phases" marketing bullshit.
Everything about the monitor is perfect image quality wise, but the only drawback as you have pointed out is its vertical viewing angle which sucks donkey balls if you want to watch a film from anywhere other then your chair. While playing and using the monitor from the chair though, all the colours, viewing angles, contrast and bightness are perfect, and everywhere is saying it is the best TN+Film monitor available, and you cant actually find a better one without spending an extra £100.

The other problem is that Acer only provide a 2 year warranty, when most monitor manufacturers these days provide 3 years. More warranty cover is always good, as I lknow from having my SE k850i and a Samsung T166 bugger up in the space of two weeks (o.O how unlucky could I get?). I also want to take more pictures of my new keyboard and mouse and put up my amateurish reviews on them somewhere, but my K800i fails at taking pictures in the dark. I will post them off for RMA once I sell my old ram (only need to make one journey to the post office then).

Thanks for the info on the motherboards - Asus have announced that they will have 16 phases on their X58 board, and I looked at the pictures and counted them, and yup, it has 16, but it will be much too expensive. MSI is sticking to their efficient, and no lies 6 phases, I think that the cheapest X58 board - MSI X58 platinum will be fine, the reason why my sytem gets unstable between 1700 and 1720 Mhz ram is likely because of the extra latency caused by it being a combo motherboard and having to use Ram selector cards. A native DDR3 motherboard from MSI should be fine. Gigabybe have been showing off their ultra durable III, and a 2 oz copper layer, which sounded very tempting, but, and I seriously cannot understand why, they have ditched using copper heatsinks and have made their X58's all Aluminium . A step forward with the motherboard design, and a step backwards for air overclockers. I will likely just get the MSI X58 Platinum, I dont think anyone else will have an X58 at that price, and I only need 2 PCI-E slots, not 3 or 4.

Quote:
Originally Posted by Rahja the Thief View Post
Ah yes Crucial. Micron set fabs are so yummy for OCing. Although, I hate to admit this. Crucial's latest DDR2 offers have been horrid and they should be ashamed of them. However, their DDR3 offers are amazing, as are GSkill's. GSkill is my top company right now though, as they seem to be moving into a purest movement with Micron fabs, and they implementing those fabs beautifully. <3

So the new eVGA x58 board is just plain sexy... Their digital power managment of vDROOP systems are AWESOME. The board to get if you ask me. Of course, that is if you ignore the fact that AMD's new Deneb CPU is a beast, and can hit 1.7v (I know, scary right?) 4.3GHz on air confirmed (Scythe cooler)

PS: bhavv, careful bud.... putting an AMD sticker with a Core2Duo inside may cause your PC to become possessed by demons and spontaneously combust. At one point, as a joke, I put an Apple sticker as a joke on one of my older systems... about 3 days after that, I went to start it up, and nada. Went to find out that overvoltage protection on my 5v rail had failed... poof went hardware... That hurt.
G.Skill are my favorite too. I used a 2x1 Gb DDR1 set in my S939 system (that is what I built first in my current case, hence the AMD sticker), and I could get it to 550 Mhz. I cant remember the name of the ram now, but it was a popular model, 2-3-2-5 400 Mhz kit that reached 500 Mhz @ 2.5-3-2-5 on just about everysingle kit, 550 Mhz @ 3-3-3-6 for me =D.

I then got 4x1 Gb of G.Skill HK, rated for 4-4-3-5 @ 800 Mhz along with an MSI P35 Neo 2 and my E8400 in february, not realising that 4 sticks wouldnt overclock as well as two. Each pair tested individually did 1000 Mhz @ 4-4-4-5 timings (Best thing possible for 1000 Mhz), but when 4 skicks were used together, they only reached 900 Mhz

They ended up selling out fast, and when they were out of stock, I managed to sell them for £40 per pair (Only paid £45 per pair when I bought them), and got some OCZ 2x2 Gb 800 Mhz for £70 which hit 1110 Mhz fully stable (great for the money). I then spotted some OCZ Flex II's for £99, and bought them along with the X48c and 2x overclocked ATI 3850's which I found for just £72 each. The OCZ 800 Mhz ram sold for about £50 (£20 loss), but I sold my P35 Neo 2 for £65, bought for £55 so made some profit on that board =D. The only thing I actually wish is that I had waited for a P45 Neo 2 - FR instead of the X48 because I just wanted better crossfire performance, and this was the true budget successor to the P35-Neo 2.

But having bought an X48c Platinum, that gives me more money towards my next upgrade when I choose to sell it, hoping of course that I can minimise any loss by making an appealing advert and relying on my good feedback. Also, compared to my Athlon 4400+ - Bought for £320, sold several years later for £80, I should make a decent amout back for my E8400 without losing as much as what I paid for it. I am also an MSI fan now because of how well they deliver for a lower price then Asus / Gigabyte. I havnt used EVGA yet because they only make Nvidia boards, and I havnt had any Nvidia cards since my SLI 6800's on an Asus A8N-SLI (That was my first build from my student loan lol)

I just upraded my ram because I found those Crucial sticks - a pair for £96 from crucial, but they were out of stock and I paid £110 for a pair from the next cheapest place I could find. I did this because my OCZ Flex-II is not going to be worth £99 for much longer, and I could sell and upgrade the ram again without losing much money. I will start off trying to sell my Flex II for £97.50 as fortune has struck me and OCUK are out of stock with their £99 price and the next cheapest is £117 (originally I was going to try sell them for £90). If they sell for tat much then whoopie =D.

Oh, my 3850's - I bought for £72 each when they were actually retailing for £120 (this is the only reason I bought two) but only managed to sell them for £50 because of how mush they have now depreciated. I splashed out like crazy on my 4850's and Monitor though, but I like them and I dont think I will need to upgrade my graphics again for at least another 2 years.

I think I will stick to the MSI X58 Platinum for my next motherboard, because it has exactly what I want and I dont end up paying extra for more PCI-E lanes (These make higher end motherboards unneccessarilly more expensive). I also need a layout which allows me to use a PCI-E slot for my X-Fi Elite Pro along with dual graphics cards - I'm not too keen on ditching a £250 sound card, especially when I want to try and attempt composing again soon. I got it purely for my minor in music, and then completely stopped playing and writing after graduating last April - not a good thing to do. I'm one of those people that are too lazy for the brain they have inside them, all I ever cared about was passing and nothing more then spending minimal effort on all my work at the last minute, but still passing with decent grades somehow. Having to learn to use Cubase will be tricky since I used Pro Tools on my course and was surrounded everyday by Mac lovers (I had so many epic Mac vs PC debates while there among other things, damn that was the best time ever being sat in a music lecture surrounded by other geeks =D). I wish I could go back to Uni now, there arent any more geeks in real life (I actually found two people that played PNP D+D, and I was shocked at being out geeked). Everyone always used to tell me I was on the wrong course and I should have done something computer based instead, and I did agree, but I failed at maths and cant do programming to save my life, so stuck to sitting in front of Pro Tools and clicking random buttons.

Dammit, I just entered my Nostalgia mode for university again

Last edited by bhavv; Oct 28, 2008 at 07:03 PM // 19:03..
bhavv is offline   Reply With Quote
Old Oct 28, 2008, 07:46 PM // 19:46   #513
Furnace Stoker
 
bhavv's Avatar
 
Join Date: Sep 2006
Default

Quote:
Originally Posted by Hannes View Post
I think you're right... watch this space, moar bl00 glowies to follow soon!
Or... should I just wait until early next year when I plan on buying another case, then pimp everything out? lol
A cathode is only a few quid, and you can carry it over to your new case as well, just might need blue tak to reapply it as the sticky pads will wear out.

Quote:
Originally Posted by Hannes View Post
AND the warrantee had JUST expired, the mobo was 13 months old :|
A motherboards manufacturers warranty should be around 3 years these days, but I can understand not wanting to ship it back to them.

Last edited by bhavv; Oct 28, 2008 at 07:49 PM // 19:49..
bhavv is offline   Reply With Quote
Old Oct 28, 2008, 09:29 PM // 21:29   #514
Frost Gate Guardian
 
Hannes's Avatar
 
Join Date: Oct 2007
Location: http://www.blowupdoll.co.za/
Guild: Band of Buds [BUD] (Officer)
Profession: N/
Default

Quote:
Originally Posted by bhavv View Post
A motherboards manufacturers warranty should be around 3 years these days, but I can understand not wanting to ship it back to them.
I really didn't know that lol. Thought it was only one year... But thanks for all the info sofar man \m/(>_<)\m/
Hannes is offline   Reply With Quote
Old Oct 28, 2008, 10:18 PM // 22:18   #515
Furnace Stoker
 
bhavv's Avatar
 
Join Date: Sep 2006
Default

Just about everything these days in computers has at least a two year warranty - My monitor, keyboard, mouse, sound card (expired), and phone (1 year left) are all two years.

My motherboard, CPU, and hard drives are all 3 years, the only thing I have with a lousy 1 year warranty are my Powercolor graphics cards, but they cost around £10-20 less then other brands as a result so are still worth buying for the lower price. My ram, like most brands was lifetime, but I went and voided that .
bhavv is offline   Reply With Quote
Old Nov 04, 2008, 10:44 PM // 22:44   #516
Furnace Stoker
 
Painbringer's Avatar
 
Join Date: Jun 2006
Location: Minnesota
Guild: Black Widows of Death
Profession: W/Mo
Default



Or



Ran across this one "Not my build" but worth a look. My only question is dosen't the MB need to be grounded?
Painbringer is offline   Reply With Quote
Old Nov 04, 2008, 11:46 PM // 23:46   #517
Site Contributor
 
zamial's Avatar
 
Join Date: Apr 2006
Location: Usa
Guild: TKC
Profession: N/
Default

Quote:
Originally Posted by Painbringer View Post
Ran across this one "Not my build" but worth a look. My only question is dosen't the MB need to be grounded?
Oddly enough the mobo ground to the psu BUT you still need conductive screws to put into the holes on the mobo or it will not complete connections and it will not boot.

you can literally build a case out of anything but those will be bad for air flow unless they use a few box fans ......
zamial is offline   Reply With Quote
Old Nov 05, 2008, 12:47 AM // 00:47   #518
über těk-nĭsh'ən
 
moriz's Avatar
 
Join Date: Jan 2006
Location: Canada
Profession: R/
Default

for my next build (whenever that will be), i will build it out of my backpack. who needs laptops
moriz is offline   Reply With Quote
Old Nov 05, 2008, 08:30 AM // 08:30   #519
Krytan Explorer
 
Admael's Avatar
 
Join Date: Sep 2005
Location: California
Guild: Xen of Heroes
Default

I once thought like that, not needing a case to save room. Then, the great coffee incident of 2007. NOTHING gets out a Starbucks coffee stain.

Quote:
Originally Posted by bhavv View Post
A motherboards manufacturers warranty should be around 3 years these days, but I can understand not wanting to ship it back to them.
EVGA has lifetime warranty on mobos and graphic cards upon registration. They replaced both my video card and mobo.


Last edited by Admael; Nov 05, 2008 at 08:33 AM // 08:33..
Admael is offline   Reply With Quote
Old Nov 05, 2008, 07:06 PM // 19:06   #520
rattus rattus
 
Snograt's Avatar
 
Join Date: Jan 2006
Location: London, UK GMT±0 ±1hr DST
Guild: [GURU]GW [wiki]GW2
Profession: R/
Default

That's a bit like a home-made Skeleton, Painbringer.

http://www.overclockers.co.uk/showpr...odid=CA-106-AN

Like the Buttercup keychain on the green rig - wonder if there's a Bubbles on the yellow? /childhoodregression
__________________
Si non confectus, non reficiat

Last edited by Snograt; Nov 05, 2008 at 07:11 PM // 19:11..
Snograt is offline   Reply With Quote
Reply

Share This Forum!  
 
 
           

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:32 PM // 23:32.


Powered by: vBulletin
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
jQuery(document).ready(checkAds()); function checkAds(){if (document.getElementById('adsense')!=undefined){document.write("_gaq.push(['_trackEvent', 'Adblock', 'Unblocked', 'false',,true]);");}else{document.write("